October 2002 onwards, according to EU Directive 72/245/EEC, and amendments to the requirements of Directive 95/54/EC, any access to the EU market for sales of automotive electrical products, e-Mark must be related to testing and certification, labeling e signs EU customs clearance will be permitted to enter the local market, so the vehicle electrical and electronic products of e-Mark certification, is imperative.
E mark from the Economic Commission for Europe (Economic Commission of Europe, referred to as ECE) regulations issued (Regulation).
ECE currently includes 28 European countries, in addition to members of the EU abroad, including Eastern Europe, Southern Europe and other non-European countries. ECE regulations are recommended for all members, not mandatory standards. Member States may apply the ECE regulations, can continue to use their own regulations. The current demand from the market point of view, usually the members are willing to receive ECE ECE regulations consistent with the test reports and certificates. E signs the certificate related parts and products are system components, there is no corresponding legislation of the vehicle certification. Access to E logo certified products, is accepted by the market. Common E logo certification of domestic products include automobile lamp, safety glass, tires, warning triangle, car electronics products. E mark certification to perform testing agencies ECE member countries are generally technical services. E signs the certificate of the issuing institution is ECE member of the government.
e-Mark logo is divided into two in the form of a rectangular frame, one is a circular frame, representing a different meaning:
Rectangular frame: refers to the state of the vehicle to stop and exercise, can be used instead of the normal use of products, such as: car charger, car lamp / flashlight, car pump, car massage / heat cushion, car fan, automotive electric water kettle, car refrigerator, car coffee maker, car TV / audio, car electric jack, car cleaners, car power tools and so on.
Circular frame: refers to the vehicle to stop and exercise state, the product must be used, for example: windshields, seat belts, headlights and so on.
E / e mark for the range of products
1, the vehicle - that is, two or three or more moving motor vehicles, such as passenger cars, trucks, motorcycles, buses and two cars on roads.
2, the steam locomotive with zero components - lamp and bulb, a variety of mirrors, tires, wheels, brakes, horn, anti-theft devices, seat belts, automotive glass and exhaust pipe.
3, vehicle accessories - helmets, child safety seat, car electrical products subsidiary. Since October 2002, to require all vehicles, vehicle parts, and electronic products for the car must be enforceable EMC testing. All electronic components sold in the EU must meet the EMC Directive unified 95/54/EC, according to EMC Directive 89/336/EEC for the self-declaration will no longer be valid. Authorized vehicles by the EU institutions issued a notice products E / e Mark certification. In other words, vehicle electronics and electronic components originally applied for CE (EMC) certification from October 2002 onwards no longer valid. European countries must re-apply for Department of Transportation issued E / e Mark certification in the European market before.
E-Mark certification on certification in the automotive category
Sales into the EU market for automotive electronics electrical products, E-Mark certification on certification in the car is divided into the following areas:
Vehicle, including - automobile, motorcycle
System includes - brakes, emissions, noise
Components include - tires, lights, mirrors, seat belts, automotive electronics, child seats, safety glass, brake pads, car refrigerator, car DVD warning signs and so on.
e-mark command describes the latest
From 1 July 2006 onwards, e-mark from the old to the new directive 95/54/EC directive 2004/104/EC-2005/49/EC started to change. For those who operate the circuit structure of the vehicle did not affect the equipment, as long as e-mark and CE EMC requirements, marked with CE mark can be exported to the EU market, without obtaining the registration of the European transport sector code. (Only authority recognized by the international testing room before this test.)
No registration code is only applicable to simple process-related functions without any interference device. Such as:
- Cooler car refrigerator
- Warmer radiator
- Fan fan
- Heater Heater
- Compressor Pump
- Charger for mobile phones car charger
- Lamps without electronic controller (outside) lights without electronic controller (external)
- Thermometer Thermometer
And the following anti-interference function of the device has only need to apply for registration code:
(A) direct control of the vehicle features:
- Weaken or change the engine, gears, brakes, suspension, steering function
- Affect the driver's location, such as location, tire orientation
- Affect the driver's vision, such as near the beam, scraper wiper;
(B) with drivers, passengers and other road users protection systems related to:
- Such as: safety airbags and other safety systems
(C) when subject to interference would confuse drivers and other road users, features:
- Vision disturbances: inappropriate operations, such as direction indicator, brake light, shape outline marker lamps, rear lamps
(D) when the disturbance will affect vehicle statutory data features, such as: speed recording device, the odometer.
There are also the following devices:
- Radio devices, wireless devices
- Car radio, car radio
- Amplifiers, audio
- Hands free car kit, hands-free phone
- GPS receiver GPS Receiver
-Parking systems, parking systems
- Portable DVD player, portable DVD drive
- Camera camera
- Alarm systems alarm system
E-MARK non-mandatory capital requirements for product testing, E signs the certificate of the issuing institution is a government department ECE member countries have the appropriate number of certificates.
Lowercase e-mark is compulsory product testing, not the same as issuing authority, e logo is a European Commission directive to force the EU member states according to motor vehicle use, security components and systems certification mark. Testing agency must be a member of the EU domestic technical services. Certification bodies of the EU member governments the transport sector. Access to e logo certified products to the EU member states are recognized. Distinguish between EUT is to see your car is not necessary vehicle equipment belonging to the car, so, do the lowercase e-mark, is not the case, do uppercase E-MARK